The classic method of creating cabinet panelled door and drawer fronts is made simple with these Profile Scriber sets. Using the combination type, parts are re-arranged on the arbor to cut the profile or scribe.
Will cut both parts of the joint by reassembly of the tool.
For router table use only. 1/4 inch and 8mm shanks must only be used with a medium or heavy duty router. For some routers the hole in the base may need to be enlarged. A workholding device must be used when cutting the scribe cut on the rail ends. The cutting edges must be staggered to each other.
Trend C157X1/2TC